Efficient 25mm 2507 12V 0.06A 17000RPM Cooling Fan for 3D Printers

Product Description

The label provides the following information about the fan:

• Model: MG2507H05X
• Voltage: 5V
• Speed: 14000RPM
• Airflow: 0.064CFM
• Air pressure: 38mmH2O
• Noise: 26.4dB
• Current: 0.19A
• Input power: 0.96W
• Bearing: Ball bearing
• Frame material: Plastic (Flammability: UL94V-0)
• Impeller material: Plastic (Flammability: UL94V-0)
• Fan weight: 5g

Performance curve

Unfortunately, the performance curve is not shown in the image.

Dimensions drawing

The dimensions drawing shows the dimensions of the fan in millimeters. The fan is square, with a side length of 25mm and a thickness of 7mm. The hole in the center of the fan is 4mm in diameter.

Overall analysis

The MG2507H05X is a small, lightweight fan that is suitable for a variety of applications. It is available in a variety of voltages, speeds, and airflows to meet the specific needs of a particular application. The fan is also relatively quiet, making it a good choice for applications where noise is a concern.

Additional details

The image also includes some additional details about the fan, such as the bearing type, frame material, and impeller material. These details can be helpful in selecting the right fan for a particular application. For example, if the fan will be used in a dusty environment, a ball bearing fan may be a good choice. If the fan will be used in a high-temperature environment, a fan with a UL94V-0 plastic frame and impeller may be a good choice.